Installation Instructions

Water 4.0 module 5 IL42-5050B
4 Insert the cable back into the Honeywell Water 4.0 module, making sure to provide strain relief for the cable. Be sure to
securely fashion the cable by using the cable tie as illustrated in the next figure.
5 Reattach the remote mount cover to the Honeywell Water 4.0 module.
6 Thread the pipe hose clamp through the slot of the mounting bracket
7 Mount and secure the Honeywell Water 4.0 module to the pipe.
8 Using the table in “Connection instructions” on page 1, connect the appropriate wires to the correct terminals on the water
meter register. Typically, the connection is made by placing the wire under the screw terminal and tightening down securely.
See the product documentation for your water meter register for more information.
9 When you have completed the installation, secure the Honeywell Water 4.0 enclosure by inserting the tamper plugs into
tamper plug mounts.
Cable tie
Preliminary