User's Manual

3UHOLPLQDU\
Contact Elster Electricity for information
REX Meter
B Display Technical Manual
B-6 30 November 2006
Figure B-8. Both phase A and phase C voltages are present
Figure B-9. Phase C voltage is not present (phase C < 50 V)
Figure B-10. Neither phase A nor phase C voltages are present (phase A and phase C < 50 V)
Network Registration Status
When selected as a display item, the REX meter displays the following
information about its network registration:
■ the REX meter is registered with a collector
■ the number of communication hops between the REX meter and the
collector
■ the four least significant digits of the collector’s LAN ID
See Figure B-11 for an example of the network registration status display.
Note: If the network registration status is selected as a display item
but the REX meter is not registered with the collector, then the
network registration status display item is skipped and is not
shown on the LCD.