User Manual
Table Of Contents
- 15-0255 - Manual.pdf
- L&G Draft passive antenna instilation guide 98-1245.pdf
- Gridstream RF Coupling Antenna Installation Guide
- Overview
- Coupler Part Numbers
- Required Materials
- List of Terms
- Optional Materials
- Qualified Meters
- General Installation Guidelines
- Gridstream RF Enhanced FOCUS AX/AX-SD Mounting Procedure
- Gridstream RF Enhanced S4e Mounting Procedure
- Gridstream RF Enhanced Integrated FOCUS AX/AX-SD Mounting Procedure
- Gridstream RF Enhanced Elster A3 Mounting Procedure
- Gridstream RF Enhanced Elster REXU Mounting Procedure
- Gridstream RF Enhanced S4x Mounting Procedure
- Antenna Brackets and Antenna Mounting
- Gridstream RF Coupling Antenna Installation Guide
Landis+Gyr Gridstream RF Coupling Antenna Installation Guide
Landis+Gyr Confidential Information 98-1245 Rev AF 13
5. Ensure that the cable tie is evenly placed over the antenna and cinch tight.
6. Ins
tall the remote antenna at the location indicated by the link assessment performed. If a link
assessment tool is not available, select a location that provides the best line of sight to the nearest
collector.
7. Once ins
talled to antenna, wrap the connector using cold flow tape. Tape should be wrapped
tightly around the cable and in a continuous manner. The tape should cover the cable one inch
past the end of the connector.
8. Secure the
cable to the side of the structure using appropriate hardware for the building.
Draft 9/25/2015