User's Manual

Chapter 4 Operation
The current system date and time may also be adjusted from with the Loc & Time display
using the Time option by pressing the ‘S’ key. This will invoke the display shown in
figure 17. New time or date digits are simply pressed on the handheld terminal, and the
two arrow keys moves the flashing cursor over top of the digit to be changed. Also, the
system time and date may be synchronized to the GPS UTC time and date by using the
UTC option (key ‘T’). It should be noted, that in the U.S., UTC time will not match local
time. Pressing the ‘Q’ key exits back to the Loc & Time menu.
Figure 17. Set Time & Date Menu Screen
Set System Time & Date
Use the S & H keys to select the digit
you wish to change. Press the ENTER key
to set the time, or press the Q key to
abandon changes.
08:24:47 10-29-1997
<--
QUIT
-->UTC