User's Manual

Chapter 4 Operation
Tools Command
The Tools command consists of seven sub-menu options. These options are used for
trouble shooting a problem with one of the Trace system components, changing the
system configuration, turning the transmitter on and off, searching and displaying
expanded data for a particular transponder, accessing stored data in the non-volatile
backup memory, or changing the default frequency control values. The Tools collection
of menus is by far the most involved and user-driven set of commands. Figure 7 shows
the location of the Tools command menu choices. Additionally, the ENTER key will
toggle the backlight on and off while in the Tools command.
Figure 7. Tools Command Sub-menus
SUMMARY READING TOOLS QUIT HELP
ROUTE
SCAN
SYSTM
SETUP
XMIT
<ON>
BKUP
MEMORY
FREQ
CTRL
TRBLE
SHOOT
SET
PERM