User's Manual

EA Mobile User Guide
7. Command mode
77
Un-int button
The Un-int button indicates the number of uninterrogated endpoints in the route.
This button displays all endpoints that have never been interrogated in the current
session. This refers to any endpoints the EA_Mobile has not yet broadcast an
interrogation signal. (This means that in FIFO mode, there should be no
interrogated endpoints after the first pass down the route list.)
M. GEO button
The M. GEO button displays the number of unread GEO accounts. This button
disable and ghosted out.
In Wind button
The In Wind button indicates the number of unread transponder in the window.
This button display all transponder that are with in the interrogation window and
have not completed or are bad reads.
Good button
The Good button indicates the number of endpoints successfully responding to
the interrogation signal. This button displays all endpoints that have replied
successfully to an interrogation, including tampered units.
Tamp. button
The Tamp. button indicates the number of endpoints returning a tamper status.
This button displays all endpoints that have returned a tamper status, regardless
of whether or not the tamper has been reset.
Note: The Tamp. button does not apply to electricity meters.
Viewing a summary
When you select one of the five summary buttons the LCD touch screen will
display a screen like the one shown below (in this example, the All button has
been selected).