User's Manual

EA Mobile User Guide
7. Command mode
69
Figure 7-10.
To exit this screen and save the new settings, press the Close button.
Changing system settings
The table below describes each setting and tells you how to change the current
setting:
Item Description
Reading Method This option allows you to change the default Reading
mode:
• L/L (Lat/Lon)
•GEO
•FIFO
Press the relevant button to select the desired mode.
The new mode will be displayed in the white text area
following the Read Method.
Display Good Reads This option allows you to set up the EA_Mobile to display
endpoint data details (endpoint LAN ID, meter reading
and street address) after receiving a good reply.
• Press the Yes or No button after this option to set to
desired value.
Sound on Good Reads This option tells the EA_Mobile whether or not to beep
after each good read.
• Press the Yes or No button after this option to set to
desired value.
Reset Tampers This option determines whether or not the EA_Mobile will
automatically attempt to reset a tamper indication after it
receives a reply.
• Press the Yes or No button after this option to set to
desired value.