User's Manual

EA Mobile User Guide
7. Command mode
62
4. Repeat for the TraceVRT folder.
5. Select the folder containing your route and navigate to the Reading.rte file.
6. Select the Reading.rte file.
The Load Route button should be enabled.
7. Press the Load Route button.
A bar graph will open indicating the progress of the load.
Note: The only files displayed other than directories are the
Reading.rte files. The Guide and start files are not visible.
8. If your system is running with a EA_VID, press the Okay button.
A new bar graph will open indicating that the EA_Mobile is waiting for data
from the EA_VID.
• Once the EA_VID is loaded press the OK button.
9. Press the Close button to return to the Routes window.
10.Press the Close button to return to the Main Menu.
You can now start reading a route, access and set System Settings, etc.
Save Current Route button
The Save Current Route button saves the current route to the USB flash drive of the
route that was last loaded or resumed. If the last route was loaded, the save
current route will write the van file to the directory the route was loaded from. If
the last route loaded was resumed or saved as old, the van file will be saved at
the /USB0/TraceVRT/ folder.
For example, if the route was loaded from /USB0/TraceVRT/031611/rt1/
Reading.rte, the van file will be written to the following directory /USB0/TraceVRT/
031611/rt1.
Resume Route button
The Resume Route button opens the Resume Route window (Figure 7-4) and will
display a button for each of the last thirty routes loaded and a Close button which
closes this window.
Note: The last route loaded can be any one of the thirty possible
buttons.
Resuming a route
To resume a route:
1. From the Main Menu press the Routes button.
This will open the Routes window.
2. From the Routes window press the Resume Route button.
This will open the Resume Route window.