User's Manual

EA Mobile User Guide
6. Reading mode
53
Set the Reading mode
The Reading mode (L/L, FIFO or GEO) can be changed if required:
1. Return to the Main Menu by pressing the Close button on the File Manager
window and then the Route window.
2. From the Main Menu, select the Settings button.
3. From the Settings window, select the System Setup button.
4. In the System Setup menu, press the button of the mode you want.
You can also set other system settings if desired at this time, such as turning
on/off audible beep. See Chapter 7, “Command mode.”
5. Press the Close button to return to the Settings window.
6. Press the Close button to return to the Main Menu.
Setting Date and Time
Caution: Failure to perform this procedure prior to reading a route may
result in the endpoints having the incorrect date or time.
Before reading any endpoints, please verify that the date and time are set
correctly in the system using the following steps:
1. From the Main Menu, press the Settings button.
The Settings window displays.
Figure 6-6.
2. From the Settings menu, press the Date & Time button.
The Date & Time window displays.