User's Manual

2 PREPARATION AND
INSTALLATION
This section details the procedures for unpacking the EA_Mobile, assembling its
components and installing them in and on your selected vehicle. This section also
specifies EA_Mobile requirements, conditions and cautions.
Vehicle requirements The EA_Mobile typically uses 100 Watts of power (8 Amps current) and is powered
by a vehicle’s standard 13.8 Volt electrical systems using the direct battery
connection cable (recommended configuration). If the optional outlet power cable
is used, the vehicle accessory outlet should be rated for 20 Amps continuous.
Operating the EA_Mobile with the optional EA_VID requires a separate accessory
outlet for each device.
Unpacking and
assembling EA_Mobile
components
When you receive the EA_Mobile, it will contain all components inside a single,
hard-shelled case that has wheels on the bottom and a handle on top for easy
transport.
Note: The optional EA_VID is shipped separately.
Figure 2-1.
EA Mobile User Guide