User Manual

APPENDIX
Page 28 EnergyAxis Gas Module ― User Guide
Elster Integrated Solutions • Draft A Nov. 2007
8. Slide the index/pulser assembly into the index box.
9. Reattach the index/pulser assembly to the index box.
• Use the 2 screws removed in Step 2.
• Ensure that the wires are not pinched anywhere before
tightening screws.
• Verify that the index turns without binding.
Route wires
toward the
notch in the
index box.
Make sure
they’re not
pinched
under posts
or spacers
Notch