User's Manual

June 2011 IL42-5015B
11
d. If you wish to use the default values, select the Installation Definition Code = 0.
e. If the displayed predivider, PreD, is incorrect, enter the correct value.
f. If a meter has a pressure compensated index (that is, red face index) enter the PCF ratio that is appropriate for that index.
Note: If required, be sure to have the module’s pressure compensation factor. Contact Elster Support at [phone].
g. Click Set or press <S>.
The interrogator will read, check and set the parameter values.
The final status will be displayed as either Set Pass or Set Fail .