Specifications

Preparation - Safety Precautions
WARNINGS
REVIEW THE ENTIRE MANUAL BEFORE USING THE INSTRUMENT AND ITS ACCESSORIES
OBSERVE ALL WARNINGS AND CAUTIONS
DO NOT OPERATE THE INSTRUMENT AROUND EXPLOSIVE GAS OR VAPOR
AVOID WORKING ALONE
B
EFORE USE
,
INSPECT THE INSTRUMENT
,
LEADS AND ACCESSORIES FOR MECHANICAL
DAMAGE, AND REPLACE WHEN DAMAGED
P
AY SPECIAL ATTENTION TO THE INSULATION SURROUNDING THE CONNECTORS AND
PLUGS
REMOVE ALL ACCESSORIES THAT ARE NOT IN USE
MAKE SURE THE INSTRUMENT IS PROPERLY GROUNDED TO A PROTECTIVE EARTH GROUND
D
O NOT APPLY INPUT VOLTAGES ABOVE THE RATING OF THE
I
NSTRUMENT AS SHOWN ON
THE NAME PLATE
DO NOT INSERT METAL OBJECTS INTO CONNECTORS AND OPENINGS
N
EVER OPEN THE INSTRUMENT
’
S ENCLOSURE DURING OPERATION
;
DANGEROUS
VOLTAGES ARE PRESENT
U
SE THE INSTRUMENT ONLY AS SPECIFIED IN THIS MANUAL
,
OR THE PROTECTION
PROVIDED BY THE INSTRUMENT MAY BE IMPAIRED
DO NOT EXPOSE THE INSTRUMENT TO EXTREME MOISTURE AND OR RAIN
TO AVOID SHOCK OR FIRE
V
ERIFY THAT THE UNIT IS DISCONNECTED FROM THE MAIN POWER SUPPLY
INSPECT ALL ELECTRICAL AND MECHANICAL CONNECTIONS VISUALLY FOR MECHANICAL
DAMAGE AND INTEGRITY OF COMPONENTS AND ACCESSORIES
INSPECT CURRENT TRANSFORMER WIRING FOR PROPER DIRECTION THROUGH THE
CYLINDRICAL APERTURE OF THE CURRENT SAMPLING MODULE
TEST ALL CONTROL WIRING TO ENSURE SECURE SEATING IN TERMINALS
B
EFORE USE
,
INSPECT THE INSTRUMENT
,
LEADS AND ACCESSORIES FOR MECHANICAL
DAMAGE, AND REPLACE WHEN DAMAGED
D
O NOT OPERATE THE INSTRUMENT OR ITS ACCESSORIES IF IT BECAME WET FOR ANY
REASON