Specifications

August 2010
G4500 BLACKBOX PORTABLE OPERATIONAL MANUAL
74
Website | Elspec
 The FTP Daemon is used for setting port number of File transfer (con-
trol channel).
 The FTP Data is used for setting port number of File transfer (data
channel).
Notice that change of FTP ports also requires a
change in PQSCADA configuration.
Access Setup
This controls the FTP login and FTP password (FTP is File Transfer) for se-
curity measures. If no security measures are required, it is suggested to leave
the default settings for straightforward PQSCADA connection.
Notice that change of access setup also requires a
change in PQSCADA configuration.
Network Time
This section controls Time Synchronization.
 Transport is used to set whether the Time Sync module selects the
source automatically or is manually forced to NTP or GPS source.
 Main SNTP is used to configure the IP address of the Primary NTP
server to be used.
 Alternate SNTP is used to configure the IP address of the secondary
NTP server to be used, in case the primary is not available.
(Refer to on page 98 for more information.)