Specifications

G4500 BLACKBOX PORTABLE OPERATIONAL MANUAL
August 2010
Elspec | Website
67
Unit Setup
The Unit Setup page is used to configure the main properties of BLACKBOX
Portable unit identification.
G4 Unit Configuration Section
The Product field specifies the type of BLACKBOX model in use. This field
is for future use.)
The Version field specifies internal HW and SW versions in which:
 Boot: Specified Boot application version. The boot application is a
small separated part of the firmware. The Boot is stored on a secured
sector in the internal flash memory chip and is used for the very begin-
ning of HW initialization and further execution of the BLACKBOX
firmware. The Boot executes either Bank A or Bank B firmware.
(Refer to Firmware Upgrade on page 88)
 SW: BLACKBOX firmware version. Notice that BLACKBOX device
contains two banks of firmware, while the version in this field refers to
the currently executed firmware.
(Refer to Firmware Upgrade on page 88)
 HW: BLACKBOX hardware version.