Specifications

G4500 BLACKBOX PORTABLE OPERATIONAL MANUAL
August 2010
Elspec | How to….?
153
7. Press the Connect button to begin a secure communication session with the
instrument.
Restore Wireless Router to Factory Defaults
The wireless router can be reset to the factory setting as a part of a complete in-
strument reset to default settings using the Reset button (refer to page 35).
However, in some situations, only the wireless router is intended to be reset leav-
ing the instrument’s settings without change.
The procedure described below is intended to restore to factory defaults only on
the wireless router.
The procedure requires establishing a Telnet session with the instrument.
(Refer to Establishing a Telnet Session on page 111).
1. On the Telnet terminal type the following wireless router reset command:
IO_Int_Reset_Wifi()
All Telnet commands and operations are case
sensitive!
2. Press Enter and wait a few seconds for the operation to complete.
When finished the function returns with the following: