Specifications

August 2010
G4500 BLACKBOX PORTABLE OPERATIONAL MANUAL
140
The Software | Elspec
It is highly important to enable the operation on the
first run by pressing the “Unblock” button. Failure to
do so will permanently disable the operation without
any further notification.
Some organizations do not allow manual firewall con-
figuration as a part of a corporate policy. Contact
your system administrator for assistance in opening
UDP port 885 when necessary.
When initiating a scan procedure, the utility appears as a grid displaying all
BLACKBOX devices found on the network.
Once open, the scan procedure can be manually prompted by using the
File>Refresh List menu as shown below.
As an alternative, the scan procedure can be configured to automatically refresh
each second. This can be done by setting the Mode>AutoRefresh to ON. The de-
fault state is OFF.