Specifications

July 2010
BLACKBOX PORTABLE QUICK REFERENCE GUIDE
III—12
On Site Setup | Elspec
Step 6: Start/Stop PQZIP Recording
In order to record actual data for further analysis by PQSCADA and
Investigator, you must first enable the PQZIP recording.
To enable PQZIP Recording:
1. From ConfigurationPQZIP Recording, select Enable, then click
Apply Changes.
2. It is recommended to record the starting/ending time and date of each
measurement set. This helps to locate individual measurement sets at a
later date.
3. After all data measurements have been taken, then you need to stop the
PQZIP recording (Disable PQZIP).
To Disable PQZIP Recording:
From ConfigurationPQZIP Recording, select Disable, then click
Apply Changes.
We strongly recommend that you verify the system
time for accuracy before recording any data.