User's Guide

T [phone] | F [phone] | 3 Ariel Sharon Blvd., P.O.B. 7, Or-Yehuda, 6037606, Israel
/ [e-mail]
14
Dialing rules are provided by your carrier. The system has pre-defined dialing rules for many global
carriers.
If your carrier is familiar, you will find its settings pre-defined. If there are no pre-defined rules for
your carrier, manually configure them here.
• If the carrier is familiar, with pre-defined dialing rules, choose Default and click Apply. All other
fields are unavailable.
• If the carrier is not familiar choose Custom. All other fields will then be available.
Configure the rules and click Apply.
Ethernet NICs
In most cases, Ethernet interfaces are used for management of the device. However, you can use the
eaaa switch to use the selected Ethernet interface to carry data (see Settings below).
This page lets you do the following:
• See the status of the Ethernet modules
• Configure routing settings
• Enable or disable the card
• Ping a specified destination IP
Settings
This section is a listing of all currently configured IP addresses.
You can:
• Switch the Data option to use this interface to carry data (rather than as a management
interface).
• Add a new IP address:
Click Add Address and enter the IP address, subnet, gateway and DNS.
• Delete an IP address: