User's Guide

T +972 77 7515600 | F +972 77 2016900 | 3 Ariel Sharon Blvd., P.O.B. 7, Or-Yehuda, 6037606, Israel
/ info@elsight.com
11
For the cellular modem and WiFi NICs, you can click to display Further Information.
Operations
The available operations vary slightly depending on the NIC type. The following table summarizes
available operations.
Enable
Enable the element.
All NIC types
Disable
Disable the element.
All NIC types
Turn On
Turn on the element (must be enabled).
Cellular modem only
Turn Off
Turn off the element.
Cellular modem only
Restart
Restart the element (must be enabled).
Cellular modem only
Send Ping
Ping specified destination IP
All NIC types
For all NICs, you can ping a specified IP address to test connectivity and verify that the card has
internet access to the desired IP address.
To ping a specified IP:
Enter the destination IP and click Send Ping.
If the test fails, check that the card is connected correctly. You may need to edit some of the
parameters such as the dialing rules (cellular modem) or IP addresses (Ethernet).