User`s guide

NVIDIA Corporation
86
NVIDIA QuadroView User’s Guide
QuadroView Toolbar Options in AutoCAD
The NVIDIA QuadroView toolbar (Figure 9.1) is loaded when you run
AutoCAD for the first time after setting up QuadroView to run within
AutoCAD.
Note: The options provided in this QuadroView toolbar within AutoCAD
provide the same functionality as those toolbars (see “QuadroView
Toolbars” on page 48) inside the NVIDIA QuadroView viewer; for
convenience, these toolbar options are provided separately through
AutoCAD.
For a complete list of additional AutoCAD commands, see “QuadroView
Commands in AutoCAD” on page 84.
NVIDIA QuadroView Toolbar
After setting up QuadroView to run within AutoCAD, the first time you run
AutoCAD, following these steps to enable the NVIDIA QuadroView toolbar:
1 From AutoCAD, click View > Toolbars. The Toolbars panel of the
Customize window appears.
2 From the “Menu Group” box, click QuadroView. In the Toolbars section on
the left of the window, you will see the following options:
QuadroView Command Description
NVDA_NVUPDBKGCOLOR
If the background color is in Sync mode, this
command updates the background color of the
document in the QuadroView viewer that corresponds
to the current document in AutoCAD. To synchronize
the background color, see “Preferences: AutoCAD
Link” on page 80.
NVDA_NVSELANIMPATHS
Selects Camera Path and LookAt Path for an
animation in the Viewer.
NVDA_NVSELLOOKATPATH
Selects only a LookAt Path. A Camera Path must
already exist.
NVDA_NVTOGCAMPATH
Toggles visibility of the spline that defines the Camera
Path.
NVDA_NVTOGLOOKATPATH
Toggles visibility of spline that defines the LookAt
Path.
NVDA_NVDELCAMPATH
Deletes animation data for Camera Path and LookAt
Path.
NVDA_NVDELLOOKATPATH
Deletes animation data for LookAt Path.
Table 9.1
NVIDIA QuadroView Commands in AutoCAD (continued)
BKNVRelQV_oem.book Page 86 Friday, April 19, 2002 2:43 AM