User`s guide

55
CONFIDENTIAL NVIDIA Corporation
C
HAPTER
6 QuadroView Toolbars
Stereo Toolbar
To access the Stereo Toolbar, right click from inside QuadroView or use the
menu sequence shown below.
Note: QuadroView supports a variety of stereo formats and stereo hardware.
You can choose different Stereo Modes as described in the “Preferences:
I/O Settings” on page 76.
You can configure stereo viewing and handling by using either the Stereo
Toolbar options described below in Table 6.6 or by using the same options from
the Camera > Stereo submenu.
Table 6.6
Stereo Toolbar Options
Option Description
Stereo
Toggles stereo mode between monoscopic (off) and
stereoscopic (on) viewing.
Stereo Offset keys measure the distance between the two rendered pictures. Use stereo offset
carefully; too much offset may result in ghosting effects.
Stereo Offset Default Resets stereo offset to the default value.
Measures the distance between the two rendered pictures. Use
stereo offset carefully; too much offset may result in ghosting
effects
Stereo Offset + Increases the amount of stereo offset.
Stereo Offset -- Decreases the amount of stereo offset.
The Parallax affects the virtual position of the objects. By decreasing the parallax balance value,
objects appear between you and the screen plane. By increasing this value, the objects appear
behind the display plane.
Menu
View > Toolbars > Stereo (toggles toolbar on and off)
Toolbar
Key
F12
Key
F10
Key
+
ALT
Key
+
ALT
BKNVRelQV_oem.book Page 55 Friday, April 19, 2002 2:43 AM