User`s guide

NVIDIA Corporation CONFIDENTIAL
52
NVIDIA QuadroView User’s Guide
2 Click the down arrow on the Output Size list box to display choices.
3 You can select one of the pre-defined numeric sizes or select one of the
following options:
• Current viewport size, which uses the size of the render area window
• Custom, where you specify the Width and Height from the drop down lists
or select an Output Size from the list of values.
The Image Aspect Ratio value is automatically calculated as Width divided
by Height.
4 Select an FPS (frames per second) from the list of values or click Default.
5 (Optional) Check Antialiasing. Using antialiasing makes lines and edges
smoother but increases the time required to create the AVI file.
6 Click OK when you are done to open the Video Compression dialog box
(Figure 6.2). The Video Compression dialog box lets you select the installed
third-party compressors of your system.
Figure 6.2
Video Compression
7
Select the desired compression codes from the Compressor list box or select
Full Frames (Uncompressed) if you do not want compression. (If you
discover problems using a special compression code, contact the company
delivering the compression code.)
8 (Optional) Use the Compression Quality slider to adjust the value.
9 (Optional) Click the Configure button to configure the compressor, then click
OK when you're done.
10Click OK again to close the Video Compression dialog box.
BKNVRelQV_oem.book Page 52 Friday, April 19, 2002 2:43 AM