User`s guide

39
CONFIDENTIAL NVIDIA Corporation
NVIDIA QuadroView User’s Guide
checked, click the check box.) If the checkbox is unchecked, you have to use
the
NVSTART
command to start QuadroView.
3
Demand Loading: If you don’t want QuadroView to be loaded when
AutoCAD starts, uncheck that application. You then have to start
QuadroView using one of these methods:
• Enter the command
NVSTART
from the command line or
• Click the icon on the NVIDIA QuadroView toolbar inside AutoCAD
Note: Older releases of QuadroView provided a different method of
automatic loading, which you can still use. If a batch file called
Acad.rx
exists in an AutoCAD working directory, the file attempts to
load the .arx applications specified there. For QuadroView, a
command line in the
Acad.rx
batch file may look like this:
C:\…\
NVIDIA\QV_c.arx
. If needed, you can specify the path where you
installed QuadroView followed by the file name
QV_c.arx
.
4 After you’ve entered the setting you want, click
OK
to accept the changes.
If you do not want to make any changes or want to cancel the changes you’ve
made, click
Cancel
.
5 If, for any reason, AutoCAD does not start after QuadroView installation, re-
install QuadroView.
Uninstalling QuadroView
To uninstall NVIDIA QuadroView, follow these steps:
1 From the Windows desktop, click
Start > Settings > Control Panel >
Add/Remove Programs.
2 Click the
Add/Remove Programs
icon.
3 Click
QuadroView
from the list.
4 Click the
Change/Remove
button.
Follow the instructions from the InstallShield program to complete
uninstallation.
BKNVRelQV_oem.book Page 39 Friday, April 19, 2002 2:43 AM