User`s guide

NVIDIA Corporation CONFIDENTIAL
34
C
HAPTER
3 System Requirements And Support
Note: The following functions apply while holding down the * key (Magellan
only).
Note: For further details, carefully read the documentation of your 3D input
device.
Note: You can use the 3D Input toolbar to adjust the sensitivity of rotation and
translation for any supported 3D input device. The following versions of
devices are supported:
• Labtec driver (Version 8.1)
• LogiCad 3D driver (Version 4.5)
Key Description
-1- Reduces sensitivity of translation.
-2- Enhances sensitivity of translation.
-3- Switches focus for QuadroView.
-4- Zooms All.
-5- Reduces sensitivity of rotation.
-6- Enhances sensitivity of rotation.
-7- Shows or Hides rotation point.
-8- Sends actual camera data to AutoCAD. (This button has no function while rendering
in the AutoCAD viewport.)
Key Description
-1- Sets translation On or Off.
-2- Sets rotation On or Off.
-3- Sets dominant input On or Off.
-4- (Zeroing) Press this key if the image is drifting without moving the cap.
-7- (Null radius) Use this key to avoid movements caused by vibrations.
-8- Resets to the driver default, e.g., Null radius.
BKNVRelQV_oem.book Page 34 Friday, April 19, 2002 2:43 AM