Installation Guide Instruction Manual

More Security, More Convenience
Fill the service port (except 80), IP address of the camera, then click Save
The port and IP address should be the same as Camera.
BELKIN:
(1) Login the router.
(2) ChooseFirewall”, select Virtual Servers
(3) Input the port (except 80) and IP address, then click save.
Note: The port and IP address should be the same as Camera.
DLINK:
(1) Login the router.
(2) ChooseAdvanced, select “Virtual Servers”
(3) Input the port, IP address, Protocol, then click save.
Note: The public port& “private portshould be the same as camera’s port, choose the protocol to be
both”.