Operating instructions

ManualsBrandsELPRO ManualsGPSLibero Cx

elproVIEWER

Operation Manual

for both editions

- Basic

- Professional

Summary of content (104 pages)

PAGE 1
elproVIEWER Operation Manual for both editions - Basic - Professional
PAGE 2
ELPRO-BUCHS AG Warranty conditions and liability disclaimer Liability Guarantee - ELPRO-BUCHS AG does not accept any liability for direct, indirect, special, incidentally occurring, randomly occurring or subsequent damage or losses including lost profit or data resulting from the use of their data loggers, sensors, accessories, software products or information from the documentation. - ELPRO-BUCHS AG does not bear any responsibility for the installation of the software products.
PAGE 3
- This guarantee is valid for material faults or production faults. - ELPRO-BUCHS AG provides a guarantee of 6 months for the following products and services: • All service work and repair • Temperature sensor • Humidity sensor - ELPRO-BUCHS AG provides a 90 day guarantee that the medium on which the software product is supplied is free from material and processing faults under normal conditions.
PAGE 4
Trademarks 4 - EN - When used in potentially explosive atmospheres, the zone category and the application and safety instructions of ELPRO-BUCHS AG must be complied with. - In the event of a guarantee claim, customers receive a repair cost estimate from ELPRO-BUCHS AG to obtain the corresponding consent before starting work. - The customer will bear the transport costs incurred for any repairs carried out by ELPRO-BUCHS AG. The DAP (value added tax) is borne by ELPRO-BUCHS AG.
PAGE 5
Table of Contents 1 Before you start.......................................................................................... 10 1.1 1.2 2 2.2 4 Editions of the elproVIEWER........................................................ 11 1.1.2 System requirements.................................................................... 12 1.1.3 Software licensing ........................................................................ 12 LIBERO PDF Logger ....................................................
PAGE 6
5 Assessment - time ........................................................................ 42 4.2.1.1 Scenario - Time ............................................................................ 42 4.2.1.2 Settings - Time ............................................................................. 43 4.2.1.3 Workflow - Time............................................................................ 43 4.2.1.4 Result of the assessment - time ...................................................
PAGE 7
5.3.4.2 6 Configuration of an elproVIEWER report ................................ 70 6.1 6.2 6.3 General contents............................................................................................ 70 6.1.1 Columns ....................................................................................... 71 6.1.1.1 Example: Configuration report ...................................................... 72 Report-related information ..................................................................
PAGE 8
9 Error messages .......................................................................................... 99 9.1 8 - EN Customer support ........................................................................................
PAGE 9
Used symbols and designations Information IMPORTANT INFORMATION AND WARNINGS  Reference to resuming chapter [xxx / yyy / zzz; e.g. 5.1.1 Add PDF reports / Title / PC time] or document Current cursor position Mouse keys - red LIBERO PDF Logger® Name of the data logger PDF data logger Designation in the document PDF report Recorded monitoring period is shown as a *.pdf file. elproVIEWER report Report of the detailed analysis carried out with elproVIEWER.
PAGE 10
B EFORE YOU STA RT 1 Before you start 1.1 Introduction to elproVIEWER Lines Tables Statistics Reports The elproVIEWER software is used both for documentation of individual LIBERO PDF files as well as a large number of PDF files. The software allows fast creation of informative reports that can be used, for example, as the basis for release of a received consignment of temperature-sensitive goods.
PAGE 11
B EFORE YOU STA RT 1.1.1 2 Editions Editions of the elproVIEWER • Basic - Free license key - Only 1 LIBERO PDF report can be documented. - Report type: Standard • Professional Up to 100 LIBERO PDF reports can be documented in the same elproVIEWER-report. Report types: Standard and assessment  Operation Manual 2.2 Current edition of elproVIEWER and 9 Error messages The structure of this Operation Manual corresponds to the organization of the user interface.
PAGE 12
B EFORE YOU STA RT 1.1.2 System requirements For details about the system requirements, refer to www.elpro.com →SUPPORT CENTER →Software Manuals → elproVIEWER The "ReadMe" file contains information about the newest functions. 1.1.3 Software licensing -> Download The elproVIEWER software can be downloaded from the website at www.elpro.com. The license key required for licensing of the Basic edition is sent free of charge by e-mail. The Basic edition can be used for a test phase of 30 days.
PAGE 13
B EFORE YOU STA RT Licensing Step 1 Enter the license key and select online activation License key If the box is checked, the elproVIEWER is automatically licensed. The licensing procedure continues with step 2. 1 Automatic connection Step 2 Test period: 30 days This window only appears if "online activation" is not activated when the license key is entered.
PAGE 14
B EFORE YOU STA RT Activate! THE TEST PERIOD OF 30 DAYS HAS ELAPSED! 1 Activation by e-mail File: elproVIEWER Basic2014.dlsc Please follow the following instructions for activation by e-mail with the license certificate.
PAGE 15
B EFORE YOU STA RT elproVIEWER licensed Completion Error messages Typo Invalid AN ERROR WAS MADE WHEN ENTERING THE LICENSE KEY OR THE KEY IS INVALID. 1 Error when sending or receiving the licensing information.
PAGE 16
B EFORE YOU STA RT THE LICENSE KEY IS VALID FOR ONE PC ONLY! Error message IN BOTH CASES THE LICENSE KEY IS INCORRECT, PLEASE CONTACT YOUR DEALER OR SEND AN E-MAIL TO SWISSE@ELPRO.
PAGE 17
B EFORE YOU STA RT 1.2 LIBERO PDF Logger LIBERO PDF Loggers are used for monitoring products that are sensitive to temperature and moisture. They make the log results available on any PC anywhere in the world as a LIBERO PDF report. The configuration of the device can be customized with the liberoCONFIG software or with LIBERO SmartStart.  LI6002Ex, LIBERO Operation Manual 1.2.1 Type: LIBERO Tx Housing elements 1. Protection cap 2. USB connector 3. Display 4. STOP/Arrived key 5.
PAGE 18
B EFORE YOU STA RT 1.2.2 Type: LIBERO Cx Housing elements 1. Protection cap 2. USB connector 3. Display; a not configured LIBERO Cx shows "ConF". 4. Start/Stop key 5. Exp:XX/YYYY Expiry date: The LIBERO Cx should not be used after this date, irrespective of the battery status. Device ID: 7100 0000 0000 Display 1. Run Flashes if it the LIBERO Cx is active; delay or data recording 2. Battery down Indicates a low battery voltage. Data access via the USB port is still possible. 3.
PAGE 19
B EFORE YOU STA RT Logging with missing measurement values (gap) 1.2.3 General Safety Information www.elpro.com - Operation Manual or help file of elproVIEWER Details on the current range of models and their data sheets is available at: www.elpro.
PAGE 20
START OF T HE ELPROVIEWER 2 Start of the elproVIEWER Start Empty start screen of elproVIEWER *All data Only the "*All data" view is available. After starting the software click the "Project" tab. Project 2 Menu - Project To create a report the first step is to create a new project or open an existing project. Within this project the LIBERO PDF reports for documentation are added and the actions required for creating a report are carried out. The completed project is them saved from this menu.
PAGE 21
START OF T HE ELPROVIEWER 1. Use L Before using the elproVIEWER for the first time make the following settings: - Colors for the cursor, zoom crosshairs, lines and alarm zones - Enter the company logos - Create the password list for reading password-protected LIBERO PDF reports - Select the temperature unit, paper size and language - Calculation options if measurement values / time ranges are missing  2.1 Options Software edition and extension of the scope of functions  2.1 2.
PAGE 22
START OF T HE ELPROVIEWER General Color Show.... Show zone color in the table view If alarm zones have been defined, they are shown as background colors in the value table. • Show measurement value designation in table view  "TR" is active for alarm condition - 5.2.5 Transit - Arrived • Show unit in table view Temperature Unit • Temperature unit: °C or °F Display examples 2 Hiding this information will ease the further processing of exported measurement values.  6.
PAGE 23
START OF T HE ELPROVIEWER 2.1.1 Colors 2 Program settings - colors Cursor Definition of the colors of both cursors and the color of the crosshairs for the zoom function. Chart - Chart background color - View The background color of the chart is specified with "View". - Report The color of the chart in the elproVIEWER report is defined with "Report".
PAGE 24
START OF T HE ELPROVIEWER The colors of the first 10 lines are specified in "Chart standard color". To line 11 the color of line 1 is assigned again. Alarm zones The "Alarm zones" option is used to define the background colors of the individual alarm zones. These settings permit optimization of the view of the individual alarm zones depending on the screen. Alarm zones only shown as lines The color of these lines cannot be changed. 2.1.2  Example: 5.2.
PAGE 25
START OF T HE ELPROVIEWER WINDOWS Explorer import Password prompt The password is automatically entered into the password list and serves for automatic identification for subsequent imports. 2.1.3 Reports File formats for logo: .jpg,. jpeg, .bmp, .png, .ico 2 Program settings - reports If required, you can insert your own company logo on the hardcopy. The size is scaled proportionately to the available space.
PAGE 26
START OF T HE ELPROVIEWER 2.1.4 Column Names Program settings - column names The column names of elproVIEWER can be given a column alias for easier identification. The column alias can, for example, be the column name from the applications liberoCONFIG or liberoMANAGER.  2 2.1.5 6.1.
PAGE 27
START OF T HE ELPROVIEWER 2.1.5.1 MKT activation energy The set standard value can only be changed if "Global activation energy" is selected. In mode: Assessment - join the calculations are only carried out with one global value for the activation energy. If different values are used in the PDF reports, a global value must be specified. For rounding reasons the accuracy of the MKT calculation is 0.5 K 2.1.5.
PAGE 28
START OF T HE ELPROVIEWER 2.2 Current edition of elproVIEWER Information on the current edition of the elproVIEWER is contained in the info window.
PAGE 29
USE OF T HE ELP ROV IE WE R 3 Use of the elproVIEWER User interface of the elproVIEWER Views  5.3 Menu - Chart The graphic shows the line curve with the scaled axes, alarm thresholds, positioned cursors and marker points.   5.2 Menu - Representation • The lines of dominant data can be highlighted. Data that are not required can be removed from the graphic.    6.3 Chart - highlight List of available views. 3 The views are the results of actions that have been carried out.
PAGE 30
USE OF T HE ELP ROV IE WE R Reports 3    4.1 Report 4.2 Assessment 6.2 Report-related information Marker point Additional information on a specific point on the line.  5.3.3 Marker points Memo Additional information on the displayed LIBERO PDF reports  5.3.4 Memos File List with the displayed LIBERO PDF reports  6.5 File Printing and exporting data  6.6.1 Data Clipboard 3.1 Information on the selected report type.
PAGE 31
USE OF T HE ELP ROV IE WE R 3.
PAGE 32
USE OF T HE ELP ROV IE WE R 3.3 Versions of elproVIEWER reports elproVIEWER has several display formats for documentation of LIBERO PDF reports. Report type Time axis Real time Single Standard Standard   Assessment   Join Comparison time Real time   Joint report  Joint assessment report The standard report is used for all simple and fast documentation cases.  Assessment Multiple lines Overlay 4.
PAGE 33
APPLICATIONS 4 Applications Configuring a LIBERO  8 LIBERO PDF report The following chapters describe two report types that were created with the elproVIEWER.   4.1 Report 4.2 Assessment THE DATA AVAILABLE FOR CREATING A REPORT DEPEND ON THE CONFIGURATION OF THE LIBERO. 4.1 Report 4.1.1 Scenario • Sender The configured LIBERO PDF Logger is packed with the good that are ready for shipment. 4 • Transport with threshold value violation The LIBERO PDF Logger records the transport conditions.
PAGE 34
APPLICATIONS 4.1.2 Creating a standard report 4.1.2.1 Specifications in the elproVIEWER Program settings If necessary modify the following general program settings for the current report: 4.1.2.2 - Colors - Password list - Size of the logo - ....  2.1 Options Workflow This workflow describes the procedure from a LIBERO to an elproVIEWER standard report in 8 steps. 4 8 steps 1. Create a project 2. Add LIBERO PDF report 3. Create a zoom for the critical area of the line 4.
PAGE 35
APPLICATIONS Step 2) Add PDF report Add individual LIBERO PDF reports, an entire folder with several LIBERO PDF reports or liberoMANAGER-Package to the project. elproVIEWER Basic only supports viewing and analysis of a PDF report. If several PDF reports are to be viewed and analyzed at the same time, an elproVIEWER Professional Version is required. Assessment reports cannot be added to a project.    3.2 From PDF reports to the elproVIEWER report 5.1.1 Add PDF reports 5.1.
PAGE 36
APPLICATIONS Procedure: Zoom • First coordinate determined *) Position information on the current cursor position Action executed • First coordinate set and second coordinate determined 4 Action executed • Second coordinate set Chart with view :*New view The view "New view" is created when the second coordinate is set. This view only shows the zoomed area.  36 - EN Further zoom functions 5.3.
PAGE 37
APPLICATIONS Step 4) Add marker points • Select the respective point Action executed • Marker point set. *) Value at the position of the marker point 4 Chart with marker point A The index is automatically positioned in the chart and is always "A" for the first marker point. The measured value information is displayed as soon as the mouse pointer is moved over the marker point. Additional operations are: Setting a marker point by means of the time and deleting a marker point  elproVIEWER SI3001Ea 5.
PAGE 38
APPLICATIONS Step 5) Create a view Action executed The view "*New view" is named "Zoom + marker point" but only saved when the project is saved. Action executed 4 Created views can be renamed and deleted  5.3.2 Views Step 6) Configure report The easiest method for creating a report is to use an existing template. If there is no template available, the report must be manually configured. - Template is available  New report - 6.2.1 Report type: Standard 6.2.
PAGE 39
APPLICATIONS Example of a displayed elproVIEWER report 4 Report - display elproVIEWER SI3001Ea EN - 39
PAGE 40
APPLICATIONS Example of a printed report 4 Report - print 40 - EN elproVIEWER SI3001Ea
PAGE 41
APPLICATIONS Step 8) Save the project  4.1.2.3 Extended Settings   4.1.3 2 Start of the elproVIEWER / Projects / Save 5.1.3 Edit threshold values 5.1.4 Time zone Archive elproVIEWER report Icons: "Archive report" Possible elproVIEWER report functions: 4.1.3.1 - Print - Save - Browse - [Close] 4 Save elproVIEWER report "Save" opens Adobe Acrobat® and permits the export of the elproVIEWER report as a PDF file.
PAGE 42
APPLICATIONS 4.2 Assessment During assessment, the existing LIBERO PDF report is created again but with a different monitoring period of different alarm thresholds. To prepare for assessment, a new project is created containing the LIBERO PDF report requiring assessment.  2 Start of the elproVIEWER / Project The following sections: 4.2.1.1 Scenario - Time to 4.2.2.2 Settings - threshold value each describe an example of assessment with a different monitoring period and different alarm thresholds. 4.
PAGE 43
APPLICATIONS 4.2.1.2 Settings - Time Program settings If necessary modify the following general program settings for the current report: 4.2.1.3 - Colors - Password list - Size of the logo - ....  2.1 Options Workflow - Time The simplest method for report configuration is to use an existing template. If there is no template available, the report must be manually configured.
PAGE 44
APPLICATIONS 3. Complete assessment report The assessment report can be given a title (120 characters) and an approval decision (4 lines of 80 characters). Depending on the approval process, a two-line signature block can be printed on the report. 4. Create report  Step 1) Preparation 6.2.2 Report type: Assessment A project is created in preparation for the assessment and the respective LIBERO PDF reports are added.
PAGE 45
APPLICATIONS 4.2.1.4 Result of the assessment - time The threshold values violation at the end of transport is outside the zoom 4 LIBERO PDF report with the modified transport time Result The original LIBERO PDF report can now be used in a modified version as an elproVIEWER assessment PDF report for transport documentation.
PAGE 46
APPLICATIONS 4.2.2 Assessment - threshold value 4.2.2.1 Scenario - Threshold values A transport process with a threshold values violation is shown as an example. In this assessment the used alarm thresholds are increased to the maximum permissible threshold values.
PAGE 47
APPLICATIONS 4.2.2.2 Settings - threshold value Program settings If necessary modify the following general program settings for the current report: - Colors - Password list - Size of the logo - ....  2.1 Options In an assessment the alarm zones are always shown as lines. 4.2.2.3 Workflow - Threshold value The simplest method for report configuration is to use an existing template. If there is no template available, the report must be manually configured.
PAGE 48
APPLICATIONS • Save the project  New report 4.2.3 Archive elproVIEWER assessment in the liberoMANAGER This workflow describes the procedure from a LIBERO PDF report to an elproVIEWERassessment with new threshold values in four steps. 1. Preparation 2. Specify new threshold values 3. Marker points and view name 4. Create report  Step 1) Preparation 6.2.2 Report type: Assessment A project is created in preparation for the assessment and the respective LIBERO PDF reports are added.
PAGE 49
APPLICATIONS 4.2.2.4 Result of the assessment - Threshold value The blue text refers to the modified alarm thresholds 4 LIBERO PDF report with the modified thresholds in accordance with the new specifications Result The original LIBERO PDF report can now be used in a modified version as an elproVIEWER PDF assessment report for transport documentation. The new alarm thresholds for this transport are met in the assessment report and the consignment can be released to the freight recipient.
PAGE 50
APPLICATIONS 4.2.3 Archive elproVIEWER assessment in the liberoMANAGER Icons: "Archive report" Possible elproVIEWER assessment functions: 4.2.3.1 - Print - Save - Export - Browse - Close elproVIEWER Save assessment "Save" opens Adobe Acrobat® and permits the export of the elproVIEWER report as a PDF file. 4 Save 4.2.3.2 elproVIEWER Export assessment The elproVIEWER assessment is saved as an *.elproVAP file in a folder for which the liberoMANAGER has access rights.
PAGE 51
APPLICATIONS The *.csv file contains: - Assessment report ID - Original Device ID (for the joint assessment report the last PDF report) - Original PDF report number (for the joint assessment report the last PDF report) - Comment (title of the elproVIEWER assessment report) - Checksum of the assessment report and the csv file.
PAGE 52
MENUS 5 Menus 5.1 Menu - Data Menu bar - data Project One or several LIBERO PDF reports for documentation are added to a new project. The LIBERO PDF reports can originate from various directories or can be added as a complete folder to the project. In the professional edition of the elproVIEWER software multiple LIBERO PDF reports can be processed simultaneously to an elproVIEWER report.  5 5.1.1 1.1.
PAGE 53
MENUS Add several files at the same time (drag and drop) 5 Add folder and subfolder WITH ELPROVIEWER PROFESSIONAL AN ELPROVIEWER REPORT MAY DOCUMENT UP TO 100 LIBERO PDF REPORTS! elproVIEWER SI3001Ea EN - 53
PAGE 54
MENUS 5.1.2 Add liberoMANAGER packages Possible file formats for import: 5.1.3 - liberoMANAGER packages, *.elproLMP files - *.zip files  Operation manual liberoMANAGER LM6002Ex Edit threshold values Alarm thresholds for the temperature and relative air humidity can be: - Activated for statistics calculation. - Manually specified or taken from the first PDF file; file index = 1. - Used with simple alarm thresholds or multiple alarm zones.
PAGE 55
MENUS • Temperature / Relative humidity "Activate" must be selected to select the alarm modes. • Alarm mode There are various different alarm modes. Threshold values Information on the definition of the threshold values in the LIBERO PDF report  8.1 Alarm & threshold values LIBERO Tx For the LIBERO Tx a note appears for the zones H3 to L2 for easier identification of the alarm zone. Representation H4 ---- H3 L1 Z5 Z1 L2 Z6 H2 Z2 L3 ---- H1 Z3 - 5.2.
PAGE 56
MENUS 5.2 Menu - Representation Menu bar 5.2.1 Multiple lines Line colors  6.3.1 Color Real time The lines are shown in accordance with the recording time. Overlay An overlay allows simple comparison of measurement lines of different LIBERO PDF reports and reports of different times in the chart view.  5 7.2 Overlay Join This function combines line curves from several LIBERO PDF reports to a single line curve. This new curve extends over the time range of all individual curves.  56 - EN 7.
PAGE 57
MENUS 5.2.2 Cursors Cursor colors  2.1.1 Colors Setting a color - The cursor is positioned by left-clicking the mouse and dragging from the left or right measured value axis. - The current measured value and time as well as the transport status are displayed.  6.
PAGE 58
MENUS 5.2.
PAGE 59
MENUS Show thresholds as areas Example: 2-channel LIBERO; THi1 Area: Channel 1 / green: no alarm Black line: Channel 2  5.2.4 Definition of the colors 2.1.1 Colors Grid Scaling X axis - This function determines the displayed resolution of the time axis. - Scaling can be carried out either automatically or manually. In automatic mode the display is adapted to the window size. Date / Time Is only active when the measured values are shown in the "Real time" view.
PAGE 60
MENUS 5.2.5 Transit - Arrived 5.2.5.1 LIBERO Tx Mark transit period All transport cycles that are between the start of transport and the consignment arrival are shown with a strong line. Only last Transit / Arrived period The last transport is shown as a thick line. The monitoring periods are recognized only if they have been marked by the Transit and Arrived button of the LIBERO Tx.  5 5.2.5.2 LI6002Ex Libero operation manual.
PAGE 61
MENUS 5.3 Menu - Chart 5.3.1 Chart area Menu bar 5.3.1.1 Zoom The Zoom function can only be used on an active Y axis (only the left Y axis, only the right Y axis). Red crosshairs mark the beginning of the required zoom range and are fixed by clicking the mouse. Then drag the red rectangle until the required section is marked. Click again to set the right bottom corner of your selection. The selected rectangle is now zoomed to full screen size.
PAGE 62
MENUS Previous zoom The last zoom action is undone. All data The current zoom window corresponds to the representation in "*All data", but only for the line curves shown in the current view.  6.1 General contents / File Move chart • Movement of the line in the chart as required. Moving is only possible when holding the mouse button. • If available, the line curve can be moved by pressing the center mouse key (red).  5.3.1.2 7.
PAGE 63
MENUS 5.3.1.3 Skip Skip backward Moves the line in the chart "*New view" and in all saved views to the left by one time range. The result is always displayed in the "*New view". Skip forward Moves the line in the "*New view" chart and in all saved views to the right by one time range. The result is always displayed in the "*New view". 5.3.2 Views Menu bar Create a view A name is given to "*All data" or "*New view". You can create any number of views of "All data".
PAGE 64
MENUS 5.3.2.1 Rename views • Views that already have a name can be renamed with this function. • Renaming of the view if possible by clicking the tab with the right mouse button (red).
PAGE 65
MENUS 5.3.3 Marker points Menu bar Positions Representation of marker points Characteristic measured values can be marked in the chart. Marker points can be set at the following positions: - Manual positioning - Setting by time and date - Marker points are shown in all views if they are inside the display area of the view. When a view is deleted, the marker points remain visible in the other views. - The marker points are indexed in alphabetical order. Always the first, free letter is used.
PAGE 66
MENUS 5.3.3.1 Add time-based marker points Marking events by specifying a point in time. Actions • Determine the respective point Point determined Result *) Value at the position of the marker • Marker point set 5 Chart with marker point A The index is automatically positioned in the chart and is always "A" for the first marker point. The measured value information is displayed as soon as the mouse pointer is moved over the marker point.
PAGE 67
MENUS 5.3.3.2 Delete marker point Clicking this icon deletes the marker point. List of marker points / Configuration section  6.
PAGE 68
MENUS 5.3.4 Memos Menu bar 5.3.4.1 Add memo Permits addition of extra information.  5.3.4.1 Add memo Memos saved with "OK" can no longer be changed. If the entry is faulty, the memo must be deleted. Actions 5 Text window for entering the memos Results - Memos can be up to 350 characters long. - Memos can only be added in the view "*All data" or added to saved views. Memos are shown in the "Configuration" section of the elproVIEWER user interface and in the elproVIEWER-report.
PAGE 69
MENUS 5.3.4.2 Delete memo Clicking the icon deletes this memo. List of memos / Configuration section  6.
PAGE 70
CONF IGURA TION OF AN E LPROVIEWER RE PORT 6 Configuration of an elproVIEWER report The content of an elproVIEWER report comprises general contents and information that depends on the report type. 6.1 General contents : User interface of elproVIEWER / section: Configuration 6 Shift The individual columns may be arranged as desired by clicking the column name and dragging to the desired position. Sorting Information can be listed in ascending or descending order.
PAGE 71
CONF IGURA TION OF AN E LPROVIEWER RE PORT 6.1.1 Columns Column - select By clicking the right mouse button on any "Column name" the window to select the columns needed for assessment pops up. 6 Example column: Highlight Column Names Column names may be assigned with column alias names freely to ease the evaluation. In the elproVIEWER report it is possible to use the additional information from the original LIBERO PDF report. Columns that are placed below the graphic are printed.
PAGE 72
CONF IGURA TION OF AN E LPROVIEWER RE PORT 6.1.1.1 Example: Configuration report 6 72 - EN Description Standard name for column alias Info Field 1 Destination Info Field 2 Transport no.
PAGE 73
CONF IGURA TION OF AN E LPROVIEWER RE PORT Standard name Column alias Assignment is carried out in the options  2.1 Options / Column Names The column alias is only active after a restart of elproVIEWER! elproVIEWER SI3001Ea Original names or names after "Reset Default Names". Columns names changed after entering column alias.
PAGE 74
CONF IGURA TION OF AN E LPROVIEWER RE PORT 6.2 Report-related information Configuration - report 6.2.1 Report type: Standard • Uses an existing template for report configuration. • Saves the configuration of the current report as a template. When a template is created once, it permits fast creation of a standard report suitable for the respective situation from a series of new LIBERO PDF reports. 6.2.1.
PAGE 75
CONF IGURA TION OF AN E LPROVIEWER RE PORT Action executed  6.2.1.2 6.4 Table and LI6002Ex LIBERO operating instructions Threshold values These are additional parameters for the statistics in the elproVIEWER report. • Entry of threshold values In assessment reports with several PDF reports the threshold values of the first PDF report are used or new values are defined. Only if "manual " is selected, the threshold values can be redefined.
PAGE 76
CONF IGURA TION OF AN E LPROVIEWER RE PORT 6.2.2 Report type: Assessment • Uses an existing template for report configuration. • Saves the configuration of the current report as a template. When a template is created once, it permits fast creation of a standard report suitable for the respective situation from a series of new LIBERO PDF reports. 6.2.2.1 General • Data range Determines the section of the chart that is used for the new assessment.
PAGE 77
CONF IGURA TION OF AN E LPROVIEWER RE PORT 6.2.2.2 Threshold values These parameters are used to modify the critical threshold values for the assessment report. • Entry of threshold values In assessment reports with several PDF reports the threshold values of the first PDF report are used or new values are defined. Only if "manual " is selected, the threshold values can be redefined. • Temperature / Relative humidity "Activate" must be selected to select the alarm modes.
PAGE 78
CONF IGURA TION OF AN E LPROVIEWER RE PORT 1. Default setting 2. Curve highlighted in "green" and "lilac" By clicking the green area all curves are selected for the change. 6.3.1 Color Each measured value line in the chart can be assigned an individual color. 6 6.
PAGE 79
CONF IGURA TION OF AN E LPROVIEWER RE PORT 6.5 6.5.1 File - Remove: Only the selected file can be deleted. A multiple selection is not possible. - PDF reports with 2 different variables result in 2 lines but with the same file index - If an attempt is made to open a damaged file, an error message appears. The file index is, however, not assigned again. It is therefore possible to ensure that the file index sequence is not monotonous. Delete file Clicking this icon deletes the selected file.
PAGE 80
CONF IGURA TION OF AN E LPROVIEWER RE PORT Yellow ID: Line is highlighted. 6.3 Chart - highlight Highlight • Mouse click -> Line • Ctrl + mouse click -> several lines • Mouse click on the green area -> all lines (Color only for documentation) 6.6.2 Graphic WINDOWS clipboard The "Copy" selection is shown by right-clicking on the selection.
PAGE 81
DAT A A NA L Y S I S 7 Data analysis elproVIEWER has a number of functions for analysis of the recorded measured values. 7.1 Statistics • Range The measured values which were used for the above calculations are shown in a "from … to" range. This range always corresponds to the time range shown in the chart. • Mean Value, Mean Variance and Std. Deviation Correspond to the calculations in accordance with the Gauss distribution curve.
PAGE 82
DAT A A NA L Y S I S 7.2 Overlay Display of the time axis: Comparison time. This function uses a relative time axis on which the individual lines are positioned in relation to a reference line. The time interval that corresponds to the lowest common multiple of all measurement intervals is used as an interval for the time axis. Missing measured values are interpolated linearly. Temperature and temperature-humidity curves can be overlaid together.
PAGE 83
DAT A A NA L Y S I S 2.) Mode: Overlay Action executed 3.
PAGE 84
DAT A A NA L Y S I S 4.) Determine the curve Activate the curve to be moved by clicking in the "Move" field (green line) Action executed 5.) Move to the reference point 7 In "Move" mode, a vertical line similar to a cursor appears at the position of the mouse pointer. The line moves in a horizontal direction synchronously with the mouse pointer, as long as it is inside the chart area and the left mouse button is pressed.
PAGE 85
DAT A A NA L Y S I S 7.3 Join This function combines line curves from several LIBERO PDF reports to a single line curve. This new curve extends over the time range of all individual curves. The time interval that corresponds to the lowest common multiple of all measurement intervals is used as an interval for the time axis.
PAGE 86
DAT A A NA L Y S I S If the gap is closed the statistics and the MKT can be calculated over the entire time range. Gaps of only 1 measurement value are automatically closed.  7.3.1 2.1.5.2 Statistics Report type: Standard • Display of the time axis: Real time • Result: Joint report 7.3.1.1 Application: Calculation of the MKT over a calendar year In this example 3 temperature curves are joined for one assessment. The first and second curve overlap at the end of the first curve.
PAGE 87
DAT A A NA L Y S I S Edit mode Initial status in which the curve ranges (time axis) of the individual curves are determined. The curves are joined by clicking this button. Switches back from mode: Join to Edit mode. 3.) Start and end time For each curve the start and end time are defined by clicking in the respective field with the cursor. Blue curve Start time of the blue curve: 19.Aug.2013 07:50:13 End time of the blue curve: 19.Aug.2013 9:26:44 AM 7 Green curve Start time of the green curve: 9.
PAGE 88
DAT A A NA L Y S I S Red curve Start time of the red curve: 19.Aug.2013 2:13:19 PM End time of the red curve: 20.Aug.2013 6:10:19 AM 4.) Mode: Join 7 Curve with data gap, joined In the resulting curve: • the start point of the blue curve is moved to the previously defined start time (19.Aug.2013 07:28:13). • The overlap between the blue and green curves is deleted. • The data gap (pink) is made visible by an interruption in the curve.
PAGE 89
DAT A A NA L Y S I S 5.) Fill existing data gap The area of the data gap (pink) is entered manually. The data are supplied by an external system (ECOLOG-NET ID301180) Curve with data gap, filled  6.) Alarm conditions 7.3 Join - Missing measurement values Define alarm conditions for the joint report 7.) Configure the report 8.) Completion elproVIEWER SI3001Ea The next steps are: Print and archive the report.
PAGE 90
DAT A A NA L Y S I S 7.3.2 Report type: Assessment • Display of the time axis: Real time • Result: Joint assessment report 7.3.2.1 Application: Transport - (Warehouse) - Transport In the following example an assessment is created which includes two transports and the storage time between transports. The following steps are necessary: 1. Import the respective PDF reports 2. Select "Join" mode 3. Define the period of time of the data to be used (select start and end time per curve) 4. Select "Join now".
PAGE 91
DAT A A NA L Y S I S 7.3.3 Condition for calculation: Statistics and MKT Alarm zones After joining only one alarm zone is used for calculation. The used alarm zone corresponds by default with the PDF report with the elproVIEWER file index 1. However, it is also possible to define other alarm zones manually or select the alarm zones of another PDF report in the project. Statistic data If a report contains several views, the statistics data are only given on the first page.
PAGE 92
DAT A A NA L Y S I S Joint assessment report When the maximum dwelling time for violation of the threshold values L2 for the documented situation is specified at 60 minutes and the threshold values in the elproVIEWER were manually modified, it was possible to release the freight with the new joint assessment report.
PAGE 93
DAT A A NA L Y S I S 7 Send a report to liberoMANAGER elproVIEWER SI3001Ea EN - 93
PAGE 94
DAT A A NA L Y S I S Joint report Setting Report type: Standard 7 Joint report page 1 Joint report page 2 94 - EN elproVIEWER SI3001Ea
PAGE 95
LIBERO PDF REPORT 8 LIBERO PDF report The information contained in the LIBERO PDF report is specified with liberoCONFIG or LIBERO SmartStart. Operation Manual of the liberoCONFIG LI6002Ex. 8.1 Alarm & threshold values Alarm modes A LIBERO can be run in three alarm modes: - OFF (alarm deactivated)  8.1.1 Single threshold values  8.1.2 Multiple alarm zones No alarm monitoring. This function is not available for LIBEROs that record the temperature and air humidity.
PAGE 96
LIBERO PDF REPORT 8.1.2 Multiple alarm zones The "Multiple alarm zones" function divides the alarm conditions into up to eight independent zones. Zone G represents the temperature range in which none of the alarm conditions were met (good range). Parameter in the window: Alarm conditions Active These boxes are used to select the required alarm zones. Temperature Data entry field for the threshold values.
PAGE 97
LIBERO PDF REPORT Evaluation Chart display Temperature progression with zones (Example: LIBERO Cx) Data elproVIEWER SI3001Ea Zone Temperature Alarm duration range [°C] Added time [h] No. of threshold violations Required plotting section for calculation H4 More than 45 2.5 1 K H3 More than 30 5.5 3 J+K+L H2 More than 15 10.
PAGE 98
LIBERO PDF REPORT 8.1.3 Extended alarm functions LIBERO Cx MKT, transport time LIBERO Cx models can trigger an alarm after: 8.1.4 - specified maximum mean kinetic temperature (MKT). - Overstepping of the transport time from the beginning of recording to the marked end of transport. Format settings Time zone used in the PDF • Represents the used time zone that is visible on the hard copy and that is integrated into the PDF file. This setting is based on UTC.
PAGE 99
ERROR MESSAGES 9 Error messages elproVIEWER Editions Basic Edition It is not possible to add a second LIBERO PDF report in this edition. A Professional license is necessary to create elproVIEWER reports with several LIBERO PDF reports. 9 Basic Edition - assessment Account Expiry date License activation The software can be used for up to 30 days prior to activation.
PAGE 100
ERROR MESSAGES 9.1 Customer support If you need further assistance from the ELPRO Customer support, please provide the following information: • Software version and licensing information Information on the current version of the elproVIEWER is contained in the info window.
PAGE 101
Index A Account Expiry date 18 Activation energy 27 Activation of the elproVIEWER 13 Add 52, 65, 68 Add file 52 Add files 53 Add marker point 66 Add memo 68 Alarm delay time 95 Alarm duration 75, 77, 97 Alarm indicator 18 Alarm mode 55, 75, 77 Alarm zones 55, 59, 91, 96 Alarm zones - colors 24 Archive 41, 50 Assessment - threshold value 46, 47 Assessment - time 42, 43 Axes 62 Axis left / right 61 B Battery 17, 18 C Change license 28 Chart - background color 23 Color 78 Column - select 71 Column alias 26, 71
PAGE 102
ERROR MESSAGES UTC 98 V Version 11 Views 29, 63 Z Zone color 22 Zoom 61 9 102 - EN elproVIEWER SI3001Ea
PAGE 103
Revision history 103 - EN Author Date Version Description A. Gubler 18.07.2013 -- 1st Edition A.
PAGE 104
ELPRO-BUCHS AG Langäulistrasse 62 CH-9470 Buchs SG Switzerland E-Mail: swiss@elpro.com For local offices see: www.elpro.com Operating instruction elproVIEWER SI3001Ea 7.