Installation manual

105U-L Wireless I/O Installation Manual
105U-L Wireless I/O Page 5 of 38
Version 1.9
Installing your unit
This section describes how to install your unit and contains the following sections:
Step Description For more information, see 
1 – Read the safety
information
Lets you understand important safety
information related to your unit.
NOTE: You must read this information
before installing your unit.
Safety Information on page 5.
2 – Get to know the unit
features
Understand the basic features of your
unit.
Unit components and connections
on page 6.
3 – Install the antenna
Learn how to install an antenna with
your unit.
Installing the antenna on page 11.
4 – Install the power supply
Learn how to install a power supply for
your unit.
Installing the power supply on
page 19.
5 – Install the units
Learn how to install your unit. Installing the unit on page 32.
6 – Linking and configuring
the unit
Learn how to link and configure your
units to transmit and receive
information.
Configuring your units on page 33.
7 – Test the unit
Understand the principles for testing
your units.
Testing your units on page 34.
Note
To ensure internal surge protection works correctly, you must earth each unit using
the Earth terminal.
For more information, see the next sections.