User's Manual

455U Radio Modem Module User Manual
Page 62 © November 2004
\K0 Purge Buffers & send break Enter command state & purge buffers.
Don’t send Break.
Purge buffers and send break to host.
\K1 As for \K0 Purge Buffers and send break As for \K0
\K2 Send Break ahead of buffered
data.
As for \K0 Transfer break to host ahead of
buffered data.
\K3 As for \K2 Send break ahead of buffered data. As for \K2
\K4 Queue Break behind buffered
data.
As for \K0 Queue Break behind buffered data.
\K5 As for \K4 Queue break behind buffered data. As for \K4
AT\S Display last received signal strength from all module addresses – 1 –
127.
AT\T Inactivity Timeout – Units Seconds. Value 0-255. 0 = Disable. If there
is no activity within this time, the modem drops the connection. See
also S Register S6.