User's Manual

455U Radio Modem Module User Manual
Page 42 © November 2004
AT&M8 - Configure DNP3 protocol mode
AT&U3 - Set station address to 3.
AT&P0=1001-1002:1 - To talk to 1001 or 1002, communicate via station 1 or station 2
respectively
AT&P2=1004:4 - To talk to 1004, go directly to station 4
AT&P3=1005:4,5 - To talk to 1005, go via station 4 then 5
4.6.3.3 Station 4 configuration
AT&M8 - Configure DNP3 protocol mode
AT&U4 - Set station address to 4.
AT&P0=1001-1002:3,1 - To talk to 1001 or 1002, communicate via 3 then to stations 1 and 2
respectively.
AT&P1=1003:3 - To talk to 1003, go directly via station 3
AT&P3=1005:5 - To talk to 1005, go directly via station 5