User's Manual

Important Notices
Page 3 © February 2005
FCC Notice:
This user’s manual is for the ELPRO 905U-E Wireless Ethernet bridge. This device
complies with Part 15.247 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference and
This device must accept any interference received, including interference that may cause
undesired operation.
This device must be operated as supplied by ELPRO Technologies Pty Ltd. Any changes or
modifications made to the device without the written consent of ELPRO Technologies Pty.
Ltd. May void the user’s authority to operate the device.
This device may only be used with ELPRO antenna / cable combinations as specified
below.
Cable Options ELPRO
Antenna
Part #
Antenna
Gain
No Cable CC10/900 CC20/900
WH900 -2dBi OK N/A N/A
DG900 -2dBi OK N/A N/A
CFD890EL 0dBi OK N/A N/A
SG900EL +5dBi N/A OK OK
SG900-6 +8dBi N/A OK OK
YU6/900 +10dBi N/A
NOT
Permitted
OK
End user products that have this device embedded must be supplied with non-standard
antenna connectors, and antennas available from vendors specified by ELPRO
Technologies. Please contact ELPRO Technologies for end user antenna and connector
recommendations.
Notices: Safety
Exposure to RF energy is an important safety consideration. The FCC has adopted a safety standard
for human exposure to radio frequency electromagnetic energy emitted by FCC regulated equipment
as a result of its actions in Docket 93-62 and OET Bulletin 65 Edition 97-01.
Limited Warranty, Disclaimer and Limitation of Remedies
ELPRO products are warranted to be free from manufacturing defects for a period of 24 months from