User's Manual

Chapter Five Specifications
Page 17 © February 2005
Configuration and Diagnostics may be opened by clicking on any of the menu items,
and entering the default username “user” and password “user”.
Switch dip-switch on 905U-E to RUN (OFF) position, and cycle power to resume
normal configured operation.
Option 2 – Set 905UE to same network as PC
a) Switch dip-switch on 905U-E to SETUP (ON) position.
b) Open a terminal package with 19200bps data rate, 8 data bit, 1 stop and no parity.
c) Power up 905U-E. Basic network settings will be displayed on the terminal as illustrated
below. When prompted, hit enter key to stop automatic boot process.