User's Manual

Page 52 E2 Wireless I/O
5.2 Diagnostic Information
Connectivity
The Connectivity webpage displays connections and available networks. The
“Connected Devices” section displays the radio channel, received signal strength, and
radio data rate for each Client or Access Point by their MAC Address. The readings
shown are based upon the last received data message from the Access Point or Client.
Client stations also display a list of detected Access points (Site Survey), including
network name (SSID), channel and maximum data rate.
Note that when updating the Connectivity webpage, it is necessary to hold down the
<ctrl> key while pressing the refresh button. Otherwise, the information will not be
updated.
Statistics
The Statistics webpage is used for advanced debugging of E2. This webpage details
the state of the E2 and performance information. This page is typically useful to ELPRO
technical support personnel in diagnosing problems with the module.
Note that when updating the Statistics webpage, it is necessary to hold down the <ctrl>
key while pressing the refresh button. Otherwise, the information will not be updated.