User's Manual

Elpro Technologies 450U-E Wireless Ethernet Modem & Device Server User Manual
56 www.cooperbussmann.com/wirelessresources Rev Version 1.0.12-Beta7
Connectivity 4.1
The Connectivity webpage displays connection information and available devices on the network
will display the MAC address, data rate, received signal strength (RSSI), authentication status and the inactive
time for each Client connected to the Access Point. The readings shown are based upon the last received data message
from the Access Point or Client. Client stations also display a list of detected Access points (Site Survey), including
network name (SSID), channel and maximum data rate.
Note: When updating the Connectivity webpage, it is necessary to hold down the <ctrl> key while
pressing the refresh button to ensure the most up to date information is displayed.
Connectivity Parameters
Mac Address
Mac address of the connected device.
IP Address
IP Address of the connected device.
Interface
Interface being used for the connection. Will indicate Radio0 Radio5
depending on the interface. Radio0 is the main Network interface and
Radio 1-5 indicates the virtual WDS interfaces.
RATE
Radio Data Rate:
RSSI
The radio receive signal strength
Auth
Shows if the modem is authenticated, i.e. modem has the correct SSID
s the modem has the correct SSID but
the wrong Encryption method/key, etc.
Inactive
Shows the last time data is received from the device.
Statistics 4.2
Figure 62 - Connected Devices
Figure 63 - Statistics