User manual

Page 88 915U-2 Wireless I/O
Page 88 User Manual
Chapter 6 - Specifications
6.1 Specifications
General
EMC specification
FCC Part 15
EN 300 683
AS 3548
FCC Part 90
89/336/EEC
Radio specification
FCC Part 15.427
AS 4268.2
RFS29 NZ
Emission designator
160KF1D
Hazardous Spec
Class I, Division 2, Groups A, B, C and D; Tamb -40˚C to +60˚C
Pollution Degree
2
Maximum Altitude
2000m
IP Rating
IP40
Installation Category
2
Housing
High Density Thermo-Plastic
5.91”x 7.09” x 1.38” (170 x 150 x 33 mm)
Mounting
DIN Rail mounting
Terminal blocks
Removable Terminals up to 12 gauge (2.5mm
2
) conductors
LED indication
Power, RF, RS232, and RS485 serial, I/O. Ethernet Link and
100Mbit indication
Operating Temp
-40 to +140 °F, -40 to +60°C,
Humidity
99% RH non-condensing
Weight
1.1 lb (500gm)
1.3lb (600gm) boxed
Power Supply
Power Supply
15 to 30VDC
Overvoltage and Reverse
voltage protected
Battery supply
12 to 15VDC
AC Supply
N/A
Analog Loop Supply
24VDC 100mA
Static Current Drain
220mA
TX Current drain
500mA
Batt charging current
1.0 Amp nominal @ 25°C
Radio Transceiver
Operating Frequency
902 – 928 MHz
Channels / Hop-sets
50 channels, 2 hop sets
Line of Site Range
15 mile LOS (USA / Canada) 12km LOS (Australia / NZ)
Antenna Connector
SMA Female
Radio data rate
19200 baud
Transmitter
Transmit power
1W
USA/Canada 4W EIRP