User manual

915U-2 Wireless I/O Page 57
Page 57 User Manual
(The reason is so the module does not send every single bit change of an analog value
and subsequently saturate the radio channel with unwanted change messages.
If a lower sensitivity is required then the above blocks can be adjusted and up to 48
more Sensitivity Blocks can be configured for different registers or different values.
Register Group – Selects the register range.
First Register– Selects the actual register number within the register group range.
Count– Selects the number of consecutive registers to apply the sensitivity to.
Sensitivity – Selects the number of counts the register needs to change by before a
Change of State trigger occurs.