User manual

915U-2 Wireless I/O Page 101

Page 101 User Manual

Pulsed I/O Rate 2

30002

Pulsed I/O Rate 3

30003

Pulsed I/O Rate 4

30004

Supply Voltage

30033

Analog Loop Supply

30034

All Expansion I/O is calculated by adding the „Offset‟ to the I/O address in the table.

The „Offset is calculated by multiplying the module address by 20, Eg.

Digital input #1 on an 115S-11 (Address 5) would be: (5x20) + 10001 = 10100

Digital output #2 on an 115S-11 (Address 6) would be: (6x20) + 2 = 121

Analog input #3 on an 115S-12 (Address 3) would be: (3x20) + 30003 = 30063.

Analog Output #7 on an 115S-13 (Address 7) would be: (7x20) + 40007 = 40147