User manual

905K Radio Telemetry Module User Manual
 ELPRO Technologies Pty Ltd 2010 Page 44
rate to be X Hz, then the analog value will be 100% at X Hz increasing, and 0% value at X Hz
decreasing.
4.8 Number of Transmissions
This parameter allows you to
select the number of
transmissions for each
message. For example, if 3
is selected, then each
message will be transmitted
three times. The time
between each transmission
will be a random time
between 0.5 and 4 seconds.
The valid choices for this
option are 1 - 5.
4.9 Programming Configurations to Modules
To program a module :
• Connect the cable from the PC’s serial port to the 905K serial port (see 3.5.4 for cable
connections)
• From the Utilities menu, select “Serial Port Setup”
• Select the appropriate serial port (COM1 - COM4)
• Select the unit to be configured from the left-hand menu
• Click on the “Program Unit” button.
You will be asked to confirm, if the module already has a different system or unit address.
Each module will need to be programmed individually.