User manual

User Manual
man_905K_1.10.doc Page 3
FCC Notice: 905U-K Wireless I/O Module
This Users Manual is for the ELPRO 905U-K wireless I/O module. This device complies with
Part 15.247 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference and
2) This device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment is suitable for use in Class I Division 2 groups A, B C and D or non-
hazardous locations only
This device must be operated as supplied by ELPRO Technologies. Any changes or
modifications made to the device without the written consent of ELPRO Technologies may void
the user’s authority to operate the device.
This device MUST be installed by Professional Radio and Antenna personnel. Standard antenna
cables, and antennas must be used, these are available from vendors specified by ELPRO
Technologies. Please contact ELPRO Technologies for end user antenna and cable
recommendations.
Notices: Safety
Exposure to RF energy is an important safety consideration. The FCC has adopted a safety
standard for human exposure to radio frequency electromagnetic energy emitted by FCC
regulated equipment as a result of its actions in Docket 93-62 and OET Bulletin 65 Edition 97-
01.