User manual

905U-G Wireless Gateway User Manual
Page 83 ©September 2004
Group Assignment
If the slave supports sync/freeze functionality, it can be assigned to the masters sync/freeze
groups by clicking on the checkboxes. The sync/freeze assignment of the groups is also
displayed (these can be changed via the master properties dialog).
Parameter Assignment
A slaves user-specific parameters can be changed via the parameter assignment page. User-
specific parameters for a slave device are defined in the corresponding GSD file for the
device, the definition of which are device-specific and should be found in the documentation
for the device.
Parameters can be altered via combo boxes or via direct input of hexadecimal values. The
hexadecimal values for the user_prm_data are displayed at the bottom of the screen and can