Manualshelf

User manual

ManualsBrandsElpro Technologies ManualsComputer equipment905U-G
111112113114115116117118119120
905U-G Wireless Gateway User Manual
Page 121 ©September 2004
Assembly Object, Class 04h
The Assembly Object binds all mapped I/O data. This data is used for I/O connections. This
object is set-up dynamically via fieldbus mappings through configuration software.
Class Attributes:
ID# Name Service Description Semantics
Def,
Min,
Max
Type
01h Revision Get_attribute_all Object
Revision
The revision
attribute containing
the revision of the
object
1,
1,
1
UINT
Input Area, Instance 64h:
ID# Name Service Description Type
03h Data Get_attribute_single The data produced is configured from fieldbus
write mappings to I/O Input Instance 1.
Array of
USINT
Note: This data is also available in the vendor specific object: I/O Data Input Mapping Object, Class A0h,
Instance Attribute 01h, and Attribute ID 01h (see I/O Data Input Mapping Object).
Input Area, Instance 65h – 69h:
ID# Name Service Description Type
03h Data Get_attribute_single The data produced is configured from fieldbus
write mappings to I/O Input Instance 2-6.
Array of
USINT
Note: This data is also available in the vendor specific object: I/O Data Input Mapping Object, Class A0h,
Instance Attribute 01h, and Attribute ID’s 02h to 06h (see I/O Data Input Mapping Object).
Output Area, Instance 96h:
ID# Name Service Description Type
03h Data Get_attribute_single
Set_attribute_single
The data produced is configured from fieldbus
read mappings from I/O Output Instance 1.
Array of
USINT
Note: This data is also available in the vendor specific object: I/O Data Output Mapping Object, Class A1h,
Instance Attribute 01h, and Attribute ID 01h (see I/O Data Output Mapping Object).
Output Area, Instance 97h – 9Bh:
ID# Name Service Description Type
03h Data Get_attribute_single
Set_attribute_single
The data produced is configured from fieldbus
read mappings from I/O Output Instance 2-6.
Array of
USINT
Note: This data is also available in the vendor specific object: I/O Data Output Mapping Object, Class A1h,
Instance Attribute 01h, and Attribute ID 01h (see I/O Data Output Mapping Object).