User manual

905U Wireless I/O Module User Manual
105S Serial I/O Module
Page 40 © October 2001
Configuring an individual module
Double-click on a unit shown on the left-hand menu. The
configuration options for each unit will appear. We recommend
that you configure I/O mappings first, and then other options.
Select “Mappings” and the following screen appears. There are
three types of mappings:
" I/O mappings which link inputs to outputs
" Poll mappings, which enables a module on start-up to
request set its outputs quickly
" Comms Fail mappings, which maps communication failure
status to an output on the local module.
I/O Mapping To enter an I/O mapping, select “New I/O Mapping”.