User's Manual

Elpro Technologies 450U-E Wireless Ethernet Modem & Device Server User Manual
76 www.cooperbussmann.com/wirelessresources Rev Version 1.4.0
Formatting USB Memory Stick
Plug the USB stick in to the PC, select and right click the stick from within Windows
-selected before pressing the
Start button.
Upgrade Procedure
1. Prior to performing the upgrade you will
need to copy the supplied firmware files to
the USB Stick root directory. They should
look something like the screenshot shown
in Figure 84.
2. When the files have been copied, remove the USB stick from the PC. Note the current firmware version of
the 450U-E by connecting to the modules home webpage. This will allow you to compare this version with
the final version to confirm the upgrade procedure has been performed successfully.
3. Remove the black plastic cover on the front of the Module which will reveal
a USB port and a reset push button switch.
4. Plug USB stick into the USB A port and press the Reset button.
5. LED will flash as per diagram below.
6. When complete, remove USB stick from 450U-E and refit the hatch
cover.
7. Upgrade is now complete; Navigate to the Home page and check
Figure 82 - Format USB
Figure 83 - Quick Format
Figure 84 - Firmware Files
Figure 85- firmware version
Figure 86 - Side access panel