User manual

Chapter 4 Configuration
Page 95 ©February 2009
1) Radio Configuration
To complete the configuration, the I/O that has now been transferred to the radio interface must
be mapped over the radio network. The analog input from the slave is mapped to an analog
output at a remote 105U-1, the 8 x digital output at the Profibus slave will be activated in this
example via appropriate mapping from 8 x digital input at a remote 105U-4 (see below).
4.11.5 Message Interface
In addition to cyclic data exchange with slave devices, the 105G Profibus Master also supports a
number of acyclic services that may be triggered via a special Message Interface. The message