User manual

105G Wireless Gateway User Manual
Elpro_man_105g_1.18.doc Page 42
Password. You have the option of entering a password to protect the configuration files against
unauthorized changes. When
you open a new project, you
will be asked to enter a
password - if you do not enter
any text - that is, press “ESC”
or “Enter”, then password
protection is disabled. If you
do enter a password, then you
will need to enter this password
to access the project. Without
the password, you are unable
access the project
The password can be between 6
and 256 characters. You can
also change password at any
time by over-typing the
password.
If you are starting a new
project, you have the option of
“Enabling Security”. This
option enables encryption of
the data sent over the radio. -
please read Section 4.2.2 and
the associated warnings before using this option.
To proceed with the
configuration, double-click on
the project name on the menu on
the left side of the screen.
“Units” will appear. You can
now enter the types of units
which will be used in the system.
If you double-click on “Units”or
select the “+” sign beside
“Units”, then the modules that
have already been created will be
displayed.