User manual

Chapter 6 Diagnostics
Elpro_man_105g_1.18.doc Page 140
To access the online diagnostics menu, first connect to the “terminal” in configuration software
(see above) or use any third party terminal package. Once the terminal is connected, display the
menu using the following procedure:
• If the configured protocol driver uses the shared RS232/485 port (i.e. Modbus, DF1, or
ELPRO Serial Driver), first enter the offline diagnostics menu (see 6.2.1 “Offline
Diagnostics” above). From the offline menu, select option “f) Initialize and Enter debug
Menu”. Once initialized the online menu will be displayed.
• For Ethernet, Profibus, Modbus Plus, or DeviceNet protocol drivers, simply press "Enter" to
display the menu. If the module was previously in configuration mode or the offline menu,
then first reset power to the module.
A menu like the following will appear on the PC screen for the all models, however
Modbus/DF1 model will not have options h) through k).
The online diagnostics menu is also referred to as the “Debug” menu. The Debug Menu allows
the Radio Interface (I/O Registers) to be viewed and modified to confirm the operation of the