User manual

105G Wireless Gateway User Manual
Elpro_man_105g_1.18.doc Page 132
Mappings are configured as per normal radio modules however the serial module is attached to
its corresponding radio. Select ‘Serial Units’ under the radio module and configure as normal
(see below).
Notes: Each 115S module has an address between 96 and 127 (modules can use up to 3
addresses).
The 105G acts as a repeater for any mapping from the 115S, also any mappings from other
remote modules to the 115S will need to have the 105G configured as a repeater.
The 105G I/O registers can also be mapped to/from the 115S I/O.