User's Manual

Using the Personal Badge
The following is a set of procedures to ensure proper use of the Personal Badge.
To use the Personal Badge:
1. Keep the IR transmission area clear.
2. Use the pad of your finger to press the button on the back of the badge.
3. The RDRs within the facility pick up the signals.
4. A brief press of the button is all it takes.
5. Maintain the position of the badge for about one second.
Battery Replacement
The battery is located inside the Personal Badge. In order to replace the battery, you
need to remove the two screws of the plastic backing of the Personal Badge and
then remove the old battery and replace it with a new one.
Replace the plastic casing and secure it with the two screws.