User's Manual
Elpas3 Personal Safety Bracelet
5-WTG41100-0, 5-WTG41120-0 (Mother Tag), 5-WTG41102-0 (Security Band)
Installation Guide
www.elpas.com
Page 1 of 4
V4/Jan 2016
Introduction
T
he Elpas3 Personal Safety Bracelet is an attractive bracelet that provides around-the-clock
monitoring of medical patients and assisted living care residents who require added safety.
T
he bracelet bundles tri-tech (in Mother Bracelet – quad-tech, includes LF transmission) Real-Time
Location System (RTLS) technologies to deliver precise real-time positioning data so that a host RTLS
safety application or an integrated physical security platform can track the whereabouts of the
individual anywhere within the facility.
Note: IR is optional. If irrelevant, users can deactivate IR functionality to conserve battery.
Elpas3 Personal safety Bracelet includes RF reception as well as transmission to allow two-way communication with
Eiris. Eiris can acknowledge when it receives an RF message.
T
he bracelet features a large duress call button designed especially for senior citizens. Pressing the
button causes the tag to transmit positioning data that identifies the person requiring assistance and
t
he precise building location of the involving medical or safety incident for speedier and more effective
response efforts.
Note: It is optional to replace the button cover of the tag with a standard plastic cover.
T
he Mother version also pairs with an Elpas Infant Protection Charm. With the press of the bracelet
button, the infant charm flashes a color, indicating the two are paired. When a user presses the button
again, the bracelet transmits an LF signal that tests if it matches with the Infant Protection Charm.
Once the pairing is made, only the wearer of the Mother Bracelet can exit designated areas with the
baby who wears the Infant Protection Charm with which it is paired.
T
he bracelet enables immediate near-exit location awareness for administering patient/staff escort
procedures and for preventing unauthorized transfers into or out of protected building areas.
Product Specifications
RTLS Technologies RF Reception and Transmission (433MHz); IR Reception (125KHz) ; LF Reception (125KHz) ; LF Transmission (in Mother Bracelet)
RF (Motion/Stationary) Supervision messages every 10 seconds / 60 seconds
IR (Motion/Stationary) Supervision messages every 10 seconds / 60 seconds
Supervised Events LF Entry/Exit: Button Press/Release, Motion/Stationary, Low Battery
RF Under LF
Entry into LF: 3 transmissions (each @ 2ms in duration), 0.5secs apart; every 2 seconds.
After 10 minutes under LF: Returns to 10 seconds while in motion
Power Source
(recommended)
3.0V/560mAH lithium battery, CR 2450
Battery Life 12-36 months depending upon usage
LED Indicator Low Battery (flashes every ten sec when below 2.6 Volts), Button Press (flashes three times), LF Field (flashes three times)
Tag & LF ID Codes Factory-Programmed
Housing IP65, Nylon Plastic
Weight 41.1 grams (1.45 ounces)
Dimensions (H x W x D) 46.9 x 41.0 x16.8mm (1.84 x 1.61 x 0.65 inches)
Operating Environment
Temp: -30°C to 70° C (-22°F to 158°F)
Humidity: 100% non-condensing
Management Software Eiris
Regulatory CE, FCC, IC compliant and certified
Warranty 1 year limited warranty
Product offerings and specifications are subject to change without notice.
Not all products include all features.
A
ccessories
Part Number Description
5-BTE00433-1 Elpas Infant Protection Charm
5-PB063011 Disposable Secure Hospital ID Band (set of 50)
5-WTA90007 Canvas Wristband with Lock Pin (set of 5)
5-500130 Lock Pin Removal Magnet
5-WTD09012 Security Band (set of 5). To insert, remove band adapters
5-WTD09009 Band Lock Key (set of 5)
5-WTD09017 WTD No Button Cover (set of 5 with 20 screws)