User's Manual

Elpas Curtain PIR Detector – Installation Guide
www.elpas.com
Page 3 of 8
V3/April 2013
Installation Guidelines
BREAK-AWAY
SEGMENT
ATTENTION: The back tamper
switch becomes functional
only when the break-away
segment is secured to the
wall with a screw.
INSERT SCREW TO
SECURE COVER
WITH BASE
4
3
POSITION THE
PCB IN ITS
PLACE IN THE
BASE
1
DRILL TWO HOLES
IN THE MOUNTING
SURFACE AND
SECURE BASE
WITH TWO
SCREWS
2
FOR BACK TAMPER
(OPTIONAL), DRILL
TWO HOLES
AND SECURE
WITH TWO SCREW
Figure 9. Surface Mounting
Notes:
1 ) After mounting, be sure that no gaps remain in the detector
housing. For example, in the area around the screw holes.
2) Remove the battery using your fingers, and not with a
screwdriver.
Bracket Mounting
Note: When mounting using the bracket, the back tamper is not functional.
Preliminary